His Majesty Lord Ganesha

$300
Item Code: ZC56
Specifications:
Wood Sculpture
Height: 12 inch
Width: 16 inch
Depth: 8 inch
Weight: 4 kg
Handmade
Handmade
Free delivery
Free delivery
Fully insured
Fully insured
Shipped to 153 countries
Shipped to 153 countries
More than 1M+ customers worldwide
More than 1M+ customers worldwide
This pleasant and delightful wooden image of Lord Ganesha represents him in a highly majestic profile, intimate moments and great leisure. In full ease the tension-free Lord is reclining like a feudal chief against a huge bolster, which he is holding under his right arm both to support his heavy body upon it and also to let it not slip due to his massive weight. The lower part of his figure is stretching quite naturally upon the carpet. Lest it looked flat the artist has placed his left leg upon his right giving the figure geometric profile. The inner bliss reflecting on his face, great contentment and absolute ease define the mood and demeanour of the great Lord. There reigns on his face a benign sublimity and great composure. For depicting him in an absolutely relaxed mood the artist has carved just below his forehead his trunk in an extra subdued form. In tension or when labouring this trunk part usually inflates.

The artist has created with master strokes enormously interesting anatomy of the elephant god. Squeezed from both sides his pot-belly has further protruded. The folds which define the belly depict the pressure both from above and below. For evading flatness the artist has conceived not only a diagonal position for his legs but has also bridged the entire form by placing on his raised leg his left arm. Like his posture his ornamentation too is highly balanced. He is wearing a conically shaped crown but considering his reclining posture the artist has designed only a smaller one lest it imbalances the entire figure by its over-dominance. He is wearing a few but elegant ornaments and the usual 'agyopavita'. Save a 'dhoti' he has no other costume on his person but in its deep green and with surging crease it has a majestic look.

This majestic wooden image of Lord Ganesha represents him as listening to a musical concert. This icon is just one member of a group of other Ganeshas who constitute the band of musicians. This image represents the Lord of them all, hence has a golden complexion befitting a majestic person. The image has been based on a flat subdued pedestal befitting the mood and occasion.

This description by Prof. P.C. Jain and Dr Daljeet. Prof. Jain specializes on the aesthetics of ancient Indian literature. Dr Daljeet is the chief curator of the Visual Arts Gallery at the National Museum of India, New Delhi. They have both collaborated on numerous books on Indian art and culture.


Free Shipping. Delivered by to all international destinations within 3 to 5 days, fully insured.

Other Sculptures in this Series:

Ganesha, The Master-Drummer

Ganesha, The Pupil Drummer

Ganesha, The Lyrist

Sculpting Serenity: Unveiling the Art of Crafting Wood Statues

Wood has been a preferred material for sculptures and statues since ancient times. It is easy to work with than most metals and stones and therefore requires less effort to shape it into any desired shape or form. The texture of the wood gives an element of realism to the sculpture. The selection of an appropriate wood type is necessary for carving. Woods that are too resinous or coniferous are not considered good for carving as their fiber is very soft and thus lacks strength. On the other hand, wood such as Mahogany, Oakwood, Walnut wood, Weet cherry wood, etc., are preferred by sculptors because their fiber is harder. A wood sculptor uses various tools such as a pointed chisel in one hand and a mallet in another to bring the wood to the desired measurement and to make intricate details on it. A carving knife is used to cut and smooth the wood. Other tools such as the gouge, V-tool, and coping saw also serve as important tools in wood carving. Although the wood carving technique is not as complex and tough as stone carving or metal sculpting, nonetheless, a wood carver requires a high level of skills and expertise to create a stunning sculpture.

1. Selecting the right wood

The process of wood carving begins with selecting a chunk of wood that is required according to the type and shape of the statue to be created by the sculptor. Both hardwoods and softwoods are used for making artistic pieces, however, hardwoods are preferred more than softer woods because of their durability and longevity. But if heavy detailing is to be done on the statue, wood with fine grain would be needed as it would be difficult to work with hardwood.
Image

2. Shaping the wood

Once the wood type is selected, the wood carver begins the general shaping process using gouges of various sizes. A gouge is a tool having a curved cutting edge which is useful in removing large unwanted portions of wood easily without splitting the wood. The sculptor always carves the wood across the grain of the wood and not against it.
Image

3. Adding detailing

When a refined shape of the statue is obtained, it is time for making details on the statue using different tools. This is achieved by using tools such as a veiner to make and a V-tool to create decorative and sharp cuts.
Image

4. Surface finishing

Once finer details have been added, the sculptor is ready to smoothen the surface and give it a perfect finish. Tools such as rasps and rifflers are used to get a smooth surface. The finer polishing is obtained by rubbing the surface with sandpaper. If a textured surface is required, this step is skipped. Finally, to protect the statue from excessive dirt accumulation, the sculptor applies natural oils such as walnut or linseed oil all over it. This also brings a natural sheen to the statue.
Image

How to care for Wood Statues?


Wood is extensively used in sculpting especially in countries like China, Germany, and Japan. One feature that makes the wood extremely suitable for making statues and sculptures is that it is light and can take very fine detail. It is easier for artists to work with wood than with other materials such as metal or stone. Both hardwoods, as well as softwood, are used for making sculptures. Wood is mainly used for indoor sculptures because it is not as durable as stone. Changes in weather cause wooden sculptures to split or be attacked by insects or fungus. The principal woods for making sculptures and statues are cedar, pine, walnut, oak, and mahogany. The most common technique that sculptors use to make sculptures out of wood is carving with a chisel and a mallet. Since wooden statues are prone to damage, fire, and rot, they require proper care and maintenance.

 

  • Wood tends to expand and contract even after it has been processed, thus it is always recommended to keep the wooden sculptures in rooms with little humidity. Excess moisture can harm your masterpiece.

 

  • Periodical dusting of the finished piece is necessary to maintain its beauty as dust accumulation on the surface takes away the shine of the sculpture. You can use a clean and soft cloth or a hairbrush for this purpose.

 

  • You must avoid applying any chemical-based solutions that may damage the wood from the inside. Instead, you can apply lemon oil or coconut oil using a cotton rag to the sculpture to bring out its natural shine. Lemon oil also helps to clean any stains on the sculpture.

 

  • Applying a layer of beeswax protects the wood from sun damage and hides even the smallest imperfections on the wood.

 

It is extremely important to preserve and protect wooden sculptures with proper care. A little carelessness and negligence can lead to their decay, resulting in losing all their beauty and strength. Therefore, a regular clean-up of the sculptures is a must to prolong their age and to maintain their shine and luster. 

Add a review
Have A Question

For privacy concerns, please view our Privacy Policy